Measurement

All drawings except the free form areas will be deselected after the creation for you to create several drawings in a row. To edit a drawing, you first have to select it and choose the right editing mode. The toolbar and the zoom function move automatically if touched while editing. Moreover, you can move the zoom function around freely.

You can switch to the select mode by clicking the hand symbol. Choose the drawing that you want to select to switch into the editing mode. The selection can also be made within the table. In this case, the selected drawing will be shown in color.

Once a drawing is selected, the app switches to the editing mode to make it possible to move the points and further edit the drawing. For a pixel-perfect result, use the arrows in the zoom function.

Within the move-mode, you can move the drawing as the whole. Certain drawings that need sizing can be adjusted to the corresponding layer and that way keep its dimensions within the layer.

Assisting reference lines that are orthogonal to the line will be shown while moving a measurement line.

You can also copy a drawing. It will be inserted in the same position as the original. Furthermore, the shift mode activates automatically to move the copy around.

There is also a delete function. Confirm you are sure that you want to delete the drawing.

The table contains an overview of all drawn and measured areas including the corresponding characteristics. You can either see the detailed overview on the whole screen or just a shortened version on the side. Just choose your preferred setting in the bottom menu or on the top right corner.

The list contains an overview of all areas and forms, the corresponding label, the net area of areas and cutouts such as the length of the reference lines. The cutouts are not only sorted by numbers, but each has a different color to differentiate from the areas. A filter gives you the option to search through the forms in the table.

Moreover, you can see the characteristics of a certain form. This way you have the name, a description of the form, measurements like areas and lengths all in one place. Moreover, you can control the visibility of the forms and delete the ones you don't need afterward. As soon as you select a form in the table, it will automatically be selected in the image (the same is the case reversed).