Scope of delivery | Robust carrying case | |
| Dimensions | |
| Contents | HS 1 room scanner |
| Manfrotto MT190X3 tripod | |
| Ansmann AN11005 charger | |
| One 32 GB USB stick | |
| ||
Weight | Total weight | 9,6 kg |
HottScan HS-1 scanner | 4,2 kg | |
Tripod | 1,8 kg | |
Laser | Type | Coaxial, visible red laser |
Measuring range | 0,05-80 m | |
Laser class | 2 | |
Laser type | 650 nm; < 1mW | |
Ø Laserpunkt (distance) | 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm | |
Accuracy | +/- 2 mm, abhängig von Entfernung, Untergrund & Lichtverhältnissen | |
Kamera | Resolution | 2592 x 1944 pixels 5 megapixel |
Opening angle | Horizontal 347°, vertikal 180° | |
Winkelmesser | Measuring range | Horizontal 347°, vertikal 180° |
Accuracy | Accuracy 0,01°, relativ | |
Operation | User interface | Control panel with soft touch buttons and LED lighting/battery capacity indicator/status indicator and error display |
Data exchange | USB-Stick | 32 GB USB flash drive |
WLAN | Range approx. 50 m (depending on surroundings) | |
Power supply | Power supply unit/charger | Lithium ion charger Primary side 100 V - 240 V, 19.5 VA, 50/60 Primary side 100 V - 240 V, 19.5 VA, 50/60 Hz Secondary side 14.8 V, 1.2 A, max. charging voltage 16.8 V |
| Working battery type | Lithium ion battery |
| Working battery data | Rated voltage 14.8 V, Working range between 11.2 V and 16.8 V |
| 5200 mAh, 77 Wh | |
| Working battery life | Up to 11.5 hours, depending on use of LED room lighting; approx. 8 hours with normal use |
| Backup battery type | Lithium polymer battery |
| Backup battery data | Rated voltage 3.7 V 2000 mAh, 7.4 Wh |
| Backup battery life | 2 minutes for the Hot Swap battery change |
| ||
Environmental conditions
| Operating temperature | Operating and charging the batteries: +0° to +40°C |
| Storage temperature | -20° to +50°C |
| Dust and moisture | IP 40 |
| The scanner is not suitable for use outside | |
| ||
Special features | Hot Swap | The rechargeable battery can be replaced in a few seconds during operation |
| Integrated lighting | Supports scanning in poor lighting conditions |
|
Zum Ende des Banners springen
Zum Anfang des Banners springen
Techincal data and operating conditions
Allgemein
Inhalt
Integrationen