The functionalities in this tab can be used if a Wifi connection in the HottScan Modeller software has been established. For the initial connection establishment the scanner has to set to the Hotspot mode. The blue Wifi LED left hand side to the tablet symbol should light up.
Windows network connection
The workstation on which the modeler is used requires a WLAN module. After the scanner is started, the scanner is searched for in the Windows network environment. The network name of each scanner is HottScan_I_AP
After clicking on the network name, clicking on the [Connect] button opens a dialog for entering the password.
Network security key
The network security key is the serial number of the scanner. The serial number is found at the bottom of the device.
The serial number is entered without a separator, for this device the string is d101173404
Remote control modeller
Now the prerequisites are fullfilled to establish a connection with the scanner in the software.
A dialog appears for entering / selecting the scanner's IP address. All scanners have the same IP address 192.165.200.1 in HotSpot mode
