Version number: 5.3.
12
Date of last change: 2803
| Inhalt | ||||
|---|---|---|---|---|
|
Version 5.3.2 from
In this version there are the following bug fixes:
In some constellations, the DIN calculation in PV had no result.
- The predefined demand profiles did not have a weekend.
- For locations outside Germany there was an error in the climate data of the summer heat protection
- New demand profiles could not be edited
Version 5.3.1 from
In this version there are the following innovations:
- The display of the parts lists has been revised and modernized. Now the parts lists can also be printed out again.
- The reference temperature for overtemperature hours can now be entered and is independent of the cooling setpoint.
- Dew point control of the cooling supply temperature in the simple system technology: In order to maximize the cooling capacity for a given cooling area, the supply temperature can now be lowered to a value just above the dew point temperature. This is only possible when cooling surfaces are selected.
Version 5.3.0 from
In this version there are the following innovations:
- Additional electricity consumers can now be entered, namely electric cars and charging stations. Thereby charging stations are rather intended for commercial uses and e-cars for residential buildings.
- In this context, the previous "Demand profiles" view has been replaced and the import and selection of predefined demand profiles has also been revised.
- In the Electricity Consumers view, consumptions can now be imported directly from csv files. This means that these are also displayed in the summary of electricity consumption on the right-hand side.
- The cxv import has been improved. The csv file to be imported is now validated directly and any problems are pointed out.
- The demand profiles can now be customized via the demand profile library.
- With many projects in the database there were delays in the program flow, this has been improved.
- For further compatibility with our programs, the underlying framework has been updated.
Version 5.2.3 from
In this version there are the following bug fixes:
- In some constellations the PV quick view or the DIN calculation had no result.
- For Buildings entered via the table, module fields were sometimes not displayed in the PV simulation.
- After the plant simulation, an error occurred in some plant configurations
Version 5.2.2 from
This update contains the following innovations:
- To ensure future compatibility with the other programs from Hottgenroth Software, the underlying Framework has been updated
- If there were a lot of contacts in the database, there were delays in the program flow, this has been improved.
- If a battery storage was selected, an error occurred in some circumstances during the printout, so that incorrect values for the self-consumption PV were output. This has been fixed.
Version 5.2.0 from
This update contains the following innovations:
- A catalog for electricity storages has been implemented, from which electricity storages can now be imported into the simulation.
- In the process, the interfaces for the electricity storages have been changed to a new design.
Version 5.1.2 from
This update contains the following innovations:
- The variant printout can now also be executed from an open variant. Previously, this was only possible from the root project.
Version 5.1.1 from
This update contains the following innovations:
- If individual project options cannot be selected due to licensing, this is now clearly displayed.
- The company address was occasionally not included in the printout. This has now been fixed.
Version 5.1.0 from
This update contains the following innovations:
- It is now possible to read in EPW files in the climate data view.
- In the variant comparison, the emissions of the variants are now also displayed and compared.
- A printout of the variant comparison is now also available. This can be called directly from the variant comparison.
- The startup process has been accelerated.
- In some constellations, the plants were not displayed correctly in the planner version. This has now been fixed.
Version 5.0.4.2 from
This update contains the following innovations:
- The Word-Export from the ETU-Planer is enabeld.
- The automatic interconnection of PV systems has been improved; it is now more robust.
Version 5.0.1.13 from
This update contains the following innovations:
- Licensing has been switched to our new license server.
- Variant comparison, which can be used to compare the results of different variants of a project.
Building capture directly in HottCAD, building data can be found by clicking the top left button in HottCAD.
- Climate data with new kilometer-resolved test reference years
- Fundamental change of the program substructure, incl. synchronization of project data with HottCAD
| Seite einschließen | ||||
|---|---|---|---|---|
|