| Inhalt |
|---|
Overview
After the simulation the most important results of the plant simulation are presented as cake diagrams. In detail these are:
- Electricity demand: The total electricity demand of the household both from the profiles and from any systems (e.g. heating rods or heat pumps).
- Heat output: This diagram shows which part of the delivered heat was produced by which heat generator.
- Electricity generation: Here you can see which part of the CHP or PV electricity is consumed by the system and which part is fed into the grid.
- Electricity demand coverage: This diagram shows which part of the electricity demand is drawn from the grid and which part is provided by the PV system or the CHP.
| Warnung |
|---|
However, with the exception of the diagram for power consumption, these diagrams are only displayed if more than one value is shown. |
Overall view & heating system
The results of the simulation are displayed graphically in hourly resolution, the type of display can be selected:
- displayed period
- Display of the values - depending on the displayed period
By clicking on a diagram, it is given the focus (colored background). Now you have the possibility to move it with the left mouse button pressed down. With the mouse wheel the resolution of the graphic representations can be increased and decreased.
Use button (2) to reset zoom and shift to the original state. The button (3) is used for CSV export. The individual diagrams can be saved as image files using button (4).
The presentation of the results is divided into three areas:
- Heat balance
- Electricity balance
- Temperature curves
The individual loads can be shown or hidden using check boxes.